Peumatic Grouting pump is designed for stress and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the loose rock mass. The most grain measurement can’t exceed zero.2 mm.
Grouting pump operation and upkeep is easy, secure and reliable. This pump is used in mines operating beneath difficult situations as a outcome of it is reliable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base frame and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it actually works
Pneumatic strain in the air cylinder exerts a excessive strain on the grout mixture which results in ejection of grout with a high stress and velocity. The valves of the air cylinder within the pump perform automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump can be pushed even without Electrical energy provide in distant areas through the use of engine pushed compressor.
Applications
The pump is majorly used in building and mining trade for injecting materials into extensive and medium size gap in beams, columns ,basement walls and flooring, carry shaft concrete wall fill-up and so on. In mining trade it’s used to refill cement answer the place there’s a gap exists between structure and rock and for soil stabilization.
Detachable design tends to easy upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly utilized in tunnels, coal mine, bridges and dams, building basis, and different underground initiatives, and inflammable, explosive sites and different dangerous surroundings.
It has software in chemical trade also to pump out chemical slurries.
ร้านซ่อมเครื่องวัดความดัน is electricity free so, can be utilized at any web site situation whether or not it’s rural or city.
Mining Pneumatic Grouting pump has a larger discharge slurry adjustment range. Generally the final quantity of the grouting volume is eight or10 instances of the amount at first. And the ultimate grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s stress and circulate can be adjusted based on the necessities of grouting,(The flow of grouting pump is 0-100L/min, stress of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is especially used for highways, railways, water and electricity, building, mining and so on. ground/underground development.
Benefits
Mining Pneumatic Grouting pump has some great benefits of low vitality consumption, small vibration, low noise, small size, excessive effectivity, dependable performance, pressure and move control, long life and so on. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can additionally be Light weight and with a wheelie design it may be carried easily. It is designed for simple operation and low upkeep. Last but not least its spare parts are simply available.
Share