Peumatic Grouting pump is designed for stress and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the unfastened rock mass. The most grain dimension can not exceed zero.2 mm.
Grouting pump operation and upkeep is easy, protected and reliable. This pump is utilized in mines operating underneath troublesome situations as a outcome of it is dependable and explosion-proof.
Basic Pneumatic Grouting pump embody: An air inlet, the pneumatic cylinder, mounting base frame and stand, pressure gauge, pumping cylinder, outlet with quick launch coupling and wheels.
How it works
Pneumatic pressure within the air cylinder exerts a high stress on the grout combination which ends up in ejection of grout with a excessive pressure and velocity. จำหน่ายเกจวัดแรงดัน of the air cylinder in the pump function automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump could be driven even with out Electrical energy supply in distant areas by using engine pushed compressor.
Applications
The pump is majorly used in building and mining trade for injecting materials into broad and medium measurement hole in beams, columns ,basement partitions and flooring, carry shaft concrete wall fill-up and so forth. In mining trade it is used to refill cement answer the place there is a gap exists between construction and rock and for soil stabilization.
Detachable design tends to simple maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly used in tunnels, coal mine, bridges and dams, building basis, and different underground initiatives, and inflammable, explosive sites and other dangerous surroundings.
It has application in chemical business also to pump out chemical slurries.
The pump is electrical energy free so, can be utilized at any website condition whether it is rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the ultimate quantity of the grouting volume is 8 or10 instances of the amount at first. And the final grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s stress and flow may be adjusted in accordance with the requirements of grouting,(The move of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).apart from, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electrical energy, construction, mining and so forth. ground/underground development.
Benefits
Mining Pneumatic Grouting pump has the advantages of low energy consumption, small vibration, low noise, small measurement, high efficiency, reliable efficiency, strain and move management, long life and so on. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can additionally be Light weight and with a wheelie design it could be carried simply. It is designed for simple operation and low upkeep. Last but not least its spare components are easily obtainable.
Share