INDUSTRYGAUGE LOGO ORI

The Turbinator from Knowsley SK – Always offering precision proportioning

In- เกจวัดแรงดันปั๊มลมpuma driven foam proportioning pumps have turn out to be more and more well-liked within the final decade. Their low pressure drop and accurate foam proportioning over a variety of flows are essential in many techniques. But this technology isn’t simple: the equipment on the market until now may be quite sophisticated and delicate to contamination and over speeding. The new Turbinator water pushed foam proportioning pump developed by Knowsley SK successfully solves these problems, making this expertise the popular alternative for a broad range of fireside preventing methods.
Precision proportioning – Always
The Turbinator is a optimistic displacement foam proportioning pump designed for Fixed and Mobile purposes. The unit is pushed by a special volumetric water motor which is directly coupled to a precision gear foam pump. Because each parts of the Turbinator are optimistic displacement gadgets, the ratio of froth concentrate to firewater is fastened over the total operating range. This makes Turbinator the best proportioning technology for methods with totally different flows, such as multi-legged deluge systems, sprinkler systems and cell giant incident gear.
The Turbinator unit doesn’t require setting up or on-site adjustment – the proportioning rate is achieved at any move price and stress throughout the working vary.
MAXI Turbinator installed on mounted skid feeding foam pouring methods on storage tanks and bunds.
Technology built to last – Forever
With Turbinator expertise, Knowsley launched a flexible, abrasion resistant paddle material within the water motor which provides the unit its unique wear characteristics. The traditional contamination current in hearth water does not injury the paddles. Overspeed up to 120% of the nominal circulate, which may occur during mechanically controlled activation of enormous techniques, doesn’t injury the unit. In addition, the Turbinator resists dry working in accordance with NFPA20.
Design and set up: Simple as 1-2-3
The close-coupled design presents a very compact and environment friendly installation with just three connections: fire water inlet (1), foam concentrate inlet (2) and foam solution outlet (3). The unit may be installed instantly into vertical or horizontal piping systems. The Turbinator foam pump delivers 3m suction height easily, which makes it potential to put in the foam focus tank below the unit installation stage – even with excessive viscosity concentrates in arctic circumstances (thick foams). Simple, value effective atmospheric foam tanks are fine for Turbinator.
With its unique low differential pressure, Turbinator suits in the most complicated methods, even when lengthy pipe runs or static strain loss are concerned. Turbinator doesn’t require exterior power supply or control circuits and is safe for any ATEX environment.
The Turbinator is on the market in 3 sizes from 500 l/min to 12’000 l/min with proportioning of 1% and 3% with freshwater and saltwater development. Each Turbinator built in our Manchester, UK manufacturing unit is one hundred pc functionally tested on a high circulate test rig by way of its complete operating vary ensuring functionality at all times.
For extra info, go to www.knowsleysk.com
Share

Facebook
Twitter
Email
Print

Leave a Reply